Wednesday, June 18, 2014

What Is In a Name?

Today I'd like to revisit one of the most basic questions when designing a resource system for a game engine:

How should resources refer to other resources?

It seems like a simple, almost trivial question. Yet, as we shall see, no matter what solution we choose, there are hidden pitfalls along the way.

To give some context to the question, let's assume we have a pretty typical project setup. We'll assume that our game project consists of a number of individual resources stored in a disk hierarchy that is checked into source control.

There are three basic ways of referring to resources that I can think of:

  • By path

  • By GUID

  • By "name"

By Path

texture = "textures/flowers/rose"

This is the most straightforward approach. To refer to a particular resource you just specify the path to that resource.

A word of warning: If you use paths as references I would recommend that you don't accept ridiculous things such as "./././models\../textures\FLOWers/////rose" even though your OS may think that is a perfectly valid path. Doing that will just lead to lots of headaches later when trying to determine if two paths refer to the same resource. Only use a canonical path format, from the root of the project, so that the path to same resource is always the same identical string (and can be hashed).

Path references run into problem when you want to rename a resource:

textures/flowers/rose -> textures/flowers/less-sweet-rose

Suddenly, all the references that used to point to the rose no longer works and your game will break.

There are two possible ways around this:

Redirects

You can do what HTML does and use a redirect.

I.e., when you move rose, you put a little placeholder there that notifies anyone who is interested that this file is now called less-sweet-rose. Anyone looking for rose will know by the redirect to go looking in the new place.

There are three problems with this, first the disk gets littered with these placeholder files. Second, if you at some point in the future want to create a new resource called rose, you are out of luck, because that name is now forever occupied by the placeholder. Third, with a lot of redirects it can be hard to determine when two things refer to the same resource.

Renaming tool

You can use a renaming tool that understands all your file formats, so that when you change the path of a resource, the tool can find all the references to that path and update them to point to the new location.

Such a tool can be quite complicated to write -- depending on how standardized your file formats are. It can also be very slow to run, since potentially it has to parse all the files in your project to find out which other resources might refer to your resource. To get decent performance, you have to keep an up-to-date cache of the referencing information so that you don't have to read it every time.

Another problem with this approach can occur in distributed workflows. If one user renames a resource while another creates references to it, the references will break when the changes are merged. (Note that using redirects avoids this problem.)

Both these methods require renames to be done with a tool. If you just change the file name on disk, without going through the tool, the references will break.

By GUID

The problems with renaming can be fixed by using GUIDs instead of paths. With this approach, each resource specifies a GUID that uniquely identifies it:

guid = "a54abf2e-d4a1-4f21-a0e5-8b2837b3b0e6"

And other resources refer to it by using this unique identifier:

texture = "a54abf2e-d4a1-4f21-a0e5-8b2837b3b0e6"

In the compile step, we create an index that maps from GUIDs to compiled resources that we can use to look things up by GUID.

Now files can be freely moved around on disk and the references will always be intact. There is not even a need for a special tool, everything will work automatically. But unfortunately there are still lots of bad things that can happen:

  • If a file is copied on disk, there will be two files with the same GUID, creating a conflict that needs to be resolved somehow (with a special tool?)

  • Lots of file formats that we might want to use for our resources (.png, .wav, .mp4, etc) don't have any self-evident place where we can store the GUID. So the GUID must be stored in a metadata file next to the original file. This means extra files on disk and potential problems if the files are not kept in sync.

  • Referring to resources from other resources is not enough. We also need some way of referring to resources from code, and writing:

    spawn_unit("a54abf2e-d4a1-4f21-a0e5-8b2837b3b0e6")

    is not very readable.

  • If a resource is deleted on disk, the references will break. Also if someone forgets to check in all the required resources, the references will break. This will happen no matter what reference system we use, but with GUIDs, everything is worse because the references:

    texture = "a54abf2e-d4a1-4f21-a0e5-8b2837b3b0e6"

    are completely unreadable. So if/when something breaks we don't have any clue what the user meant. Was that resource meant to be a rose, a portrait, a lolcat or something else.

In summary, the big problem is that GUIDs are unreadable and when they break there is no clue to what went wrong.

By "Name"

Perhaps we can fix the unreadability of GUIDs by using human readable names instead. So instead of a GUID we would put in the file:

name = "garden-rose"

And the reference would be:

texture = "garden-rose"

To me, this approach doesn't have any advantages over using paths. Sure, we can move and rename files freely on disk, but if we want to change the name of the resource, we run into the same problems as we did before. Also, it is pretty confusing that a resource has a name and a file name and those can be different.

By Path and GUID?

Could we get the best of both worlds by combining a path and a GUID?

I.e., the references would look like:

texture = {
 path = "textures/flower/rose"
 guid = "a54abf2e-d4a1-4f21-a0e5-8b2837b3b0e6"
}

The GUID would make sure that file renames and moves were handled properly. The path would give us the contextual information we need if the GUID link breaks. We would also use the path to refer to resources from code.

This still has the issue with needing a metadata file to specify the GUID. Duplicate GUIDs can also be an issue.

And also, if you move a file, the paths in the references will be incorrect unless you run a tool similar to the one discussed above to update all the paths.

Conclusions

In the Bitsquid engine we refer to resources by path. Frustrating as that can be sometimes, to me it still seems like the best option. The big problem with GUIDs is that they are non-transparent and unreadable, making it much harder to fix stuff when things go wrong. This also makes file merging harder.

Using a (GUID, path) combination is attractive in some ways, but it also adds a lot of complexity to the system. I really don't like adding complexity. I only want to do it when it is absolutely necessary. And the (GUID, path) combination doesn't feel like a perfect solution to me. It would also require us to come up with a new scheme for handling localization and platform specific resources. Currently we do that with extensions on the file name, so a reference to textures/flowers/rose may open textures/flowers/rose.fr.dds if you are using French localization. If we switched to GUIDs we would have to come up with a new system for this.

We already have a tool (the Dependency Checker) that understands references and can handle renames by patching references. So it seems to me that the best strategy going forward is to keep using paths as references and just add caching of reference information to the tool so that it is quicker to use.

15 comments:

  1. We had this exact discussion (again) yesterday as we are trying to decide which to go with. For the past 12 years we've used GUID filenames. Basically they are "typename/{guid}.ext". For some reason we thought we needed an extension, but since the directory already does that there is no point in having a different extension per type.

    Our data files have always been binary in the past and were created in our tools, so there was no need to specify a friendly name for anything other than our main 'game' file. We do keep an index file per directory that has the object's name+guid in it for faster directory listings (vs opening every file to get header information). This is still not great, but was definitely faster and we can cache other bits of information if needed.

    We wrap any non-engine resources with an engine resource anyway to specify other values such as texture format or mipping. So Rose.png will have a Texture/{guid} file. The Texture resource knows about its external dependencies (Rose.png) so it's fairly easy to find any broken lines with those.

    In the past, we have not had a way to group our resources into sub-directories or tag them. We're planning to do this now, and could either generate a directory structure from a per-resource "location" field or use 'tags' to group similar resources which allows for one resource showing up under multiple tags. This is also easy to add to the index file.

    We have our own source control tool built into the editor, so it displays proper names in there instead of GUIDs, though it would be nice to not have this requirement.

    One final issue with our GUID-based names has been that it is possible to have the same display name for multiple files. So in a Textures list, it might show "Rose" twice for instance (or 5 times if you're lucky?). This *shouldn't* happen because multiple people shouldn't be creating the same engine resource, but it does often enough that I added a tool to help find duplicates.

    With all that said we were thinking of switching to text resource files this time. But text resource files seem to require normal filenames for readability (diffs). This still requires a tool to handle renames and deletes (finding which files reference the target file) -- not a big deal as we'll have our own asset browser. It does open up the ability for people to put the same resource in different directories which would duplicate the resource in memory and on disk, but we could write a tool to find these as well.

    Even with text file names I imagine we'll still have a GUID property field in each object. In the past we've used this for network and save-game serialization and I'd rather not have to have an initial 'sync' of resource filenames to ids as clients connect. But having this embedded in the file also means no Explorer-based copy/pasting of files as I think you mentioned. It would be great if we could guarantee a unique hashcode from the filename. I thought in earlier papers/blogs you mentioned doing this, but the issue of having a duplicate GUID show up and break things is a bit scary.

    Finally there's also an issue of nested resources and naming them. Do you do a URL style "Common/UI.strings#Cancel" to specify the 'Cancel' string id inside the "Common/UI" string table? This gets more complicated as you now have to deal with catching those renames and making sure your inner-package id's are unique. Do you have any thoughts on handling this nicely with text filenames? With guid filenames and id's it would just be a pair "{file/package-guid}, {nested-object-guid}".

    Thanks again for all the blog posts and congrats on the Autodesk deal!
    -Doug

    ReplyDelete
  2. there are older systems around that still use unique integers. they have all same issues as guids. In complex cases u can have all 3 ways used =)

    ReplyDelete

  3. Very informative post I really like it. Happy to hear about it more.Kingsman Jackets

    ReplyDelete
  4. I read your article several times since you make so many excellent points. For the most part, your viewpoints are similar to mine. This is excellent material for your readers.
    garmin watch sell

    ReplyDelete
  5. Your article is well-written and understandable even to a novice. As a result, beginners may find it incredibly useful. Thank you very much for sharing that information with us. Writers like you inspire me and I admire and respect them.
    mz7km480hahp

    ReplyDelete
  6. Your article is well written and simple to understand. You make excellent points.Thanks for the sharing great blog...

    ReplyDelete
  7. Are you looking for top-notch trombone lessons in Sydney? Standout Music Studio has you covered! Our experienced instructors offer personalized lessons for all levels, from beginners to advanced players.
    https://soundcloud.com/mollygreville316/

    ReplyDelete